The Mi Mix 3 sports a dual camera setup on the back side ( a 12-megapixel with f/1.8, 1.4-micron + 12-megapixel with f/2.4, 1-micron). It also has dual front camera 24-megapixel + 2-megapixel. The device comes with a sliding mechanism for the rear camera. Users have to slide to open the back side cameras. The Mi Mix 3 houses a 3850mAh non-removable battery. The device runs Android 9 Pie Out of the box at the top of Xiaomi’s MIUI 10. In all the Android devices, you will find a crucial feature called the bootloader mode. Each and every device comes with both the Recovery (stock) and the bootloader mode. This mode will allow a user to perform tasks like flashing/modifying the system partitions, unlocking the bootloader, different OEM level operations, installing TWRP or other custom recoveries, and more. This part is basically the fun part where you get to tinker with the settings and give your device a brand new outlook. Today, in this post, we will be sharing with you how to boot your Xiaomi Mi Mix 3 Bootloader/Fastboot mode. There are two methods using which you can boot into Xiaomi Mi Mix 3 Bootloader/Fastboot mode.
Steps To Enter Xiaomi Mi Mix 3 Bootloader/Fastboot Mode
There are two ways which can help you to boot into Xiaomi Mi Mix 3 Bootloader / Fastboot Mode 1) Using Power and Volume Keys 2) fastboot commands via Computer
#1 Using Hardware Keys
Follow the given steps to boot into Xiaomi Mi Mix 3 Bootloader by hardware buttons
You have to Press and hold the power button for a few seconds Now tap the Power Off option when the Power Menu appears Now you have to Wait for the Xiaomi 6 to completely turn off Then press and hold the Power button and the Volume Down button at the same time Continue holding these two buttons down until you boot into Fastboot Mode
#2 Using PC fastboot Commands
If you want to boot Xiaomi Mi Mix 3 into bootloader mode from your PC, then follow the linked guide below
Connect your android to your PC with USB cable Now go to ADB & fastboot folder and Open the command window there(Right click on the empty space inside the folder then select “Open command window here” or “Open PowerShell Window Here” option to launch a command window Now reboot into the bootloader by issuing the following commands. (Make sure your device is detected by your PC)
Now Check fastboot connectivity by giving the command below.If your device is connected properly then it should return device code.
If you have any question related to this post, feel free to leave that in the comment section
